TP-Link TL-SG105PP-M2 5-Port 2.5G Desktop Switch with 4-Port PoE++

5× 10 Mbps/100 Mbps/1 Gbps/2.5 Gbps RJ45 ports

With four PoE++ ports, transfers data and power on one single cable

Works with IEEE 802.3af/at/bt type3 compliant PDs

802.1p/DSCP QoS enable smooth latency-sensitive traffic

Supports PoE Power up to 60 W for each PoE++ port

Supports PoE Power up to 123 W for all PoE ports*

PoE Auto Recovery guarantees stable operation of PoE devices by automatically rebooting the dropped or unresponsive PD devices

Plug and Play, no configuration and installation required

Learn more about TP-Link PoE technology >

QoS for Traffic

Prioritization

2.5G Super-Fast Speeds without Changing Cables

This switch delivers 2.5 times faster network performance than traditional Gigabit switches. It works with CAT5e, CAT6, CAT6a and above cables without upgrading your cabling.

Unlock the Peak Performance of Devices with Multi-Gigabit PoE++ Ports

Featuring 5× 2.5 Gbps PoE++ ports, the switch supports a total PoE power budget of 123 W* with 60 W max per PoE++ port and is capable of future network expansion and deployment.

System Self-Healing with PoE Auto Recovery △

Recovery mode helps automatically detect and reboot PD devices, such as cameras and APs, when they fall offline or go unresponsive—all without needing manual monitoring and restarts.

Plug and Play

2. Connect the Devices

IP Phone

IP Camera

Access Point

Internet

Router

Ek sürüm bilgisi için lütfen destek sayfasına gidin.

*PoE budget calculations are based on laboratory testing. Actual PoE power budget is not guaranteed and will vary as a result of client limitations and environmental factors. △Numbers after different modes represent the effective ports for that mode.